List of
Publications:
Report,
Thesis, Feasibility & Proposal:
Khan, W.A; (1985) et.al. , “Development of manually Operated portable
reverse osmosis unit for water purification”, Department of Mechanical
Engineering, NED University of Engineering and Technology, Karachi,
Pakistan.
Khan,
W.A; (1990); “Investigation of Tool Path Sequencing Problem in
Hierarchical CIM Environment”; Ph.D. Thesis; Department of Mechanical
and Process Engineering University of Sheffield, England, UK.
Khan,
W.A; Sayeed R.; Khan, W.A.; Siddiqui, M.I, (1994) “Feasibility report
on Development of Manufacturing facility for Cylindrical products”;
Manufacturing System Development Section; Production division, SUPARCO,
Karachi, Pakistan.
Khan,
W.A; (1995); proposal on “Development of Model CNC Milling Machine”,
Faculty of Mechanical Engineering GIK Institute of Engineering Sciences
and Technology, TOPI, N.W.F.P., Pakistan.
Khan,
W.A; (1995); proposal on “Development of Model Revolute Robot”;
Faculty of Mechanical Engineering, GIK Institute of Engineering Sciences
and Technology, TOPI, N.W.F.P., Pakistan.
Khan,
W.A; (1998); proposal on “CNC retrofitting of conventional
machines”; Faculty of Mechanical Engineering, GIK Institute of
Engineering Sciences and Technology, TOPI, N.W.F.P., Pakistan.
Khan,
W.A. et.al. , (2003); “ Solution of Traveling Salesman Problem at
Parallel Virtual Machine’; Scientific Research Unit of King Abdul Aziz
University; Sanctioned Grant of SR 82600.00
Khan,
W.A. et.al. , (2003); “ Solution of Traveling Salesman Problem at
Parallel Virtual Machine’; Scientific Research Unit of King Abdul Aziz
University; Requested Grant of SR 90000.00
Research
Paper (Journals):
Khan, W.A. and Hayhurst, D.R; (1991); “Computer Aided Part Program
Segmentation And Reconstruction for Minimization of Machine Tool
Residence Time”; Int. J. of Computer Integrated Manufacturing; Vol. 4;
No. 5;pp.300-314.
Khan,
W.A. And Hayhurst, D.R; (1991) “Computer Aided Parametric Design And
Manufacture of Hand Tool”; Journal of Engineering Design; Vol. 2; No.
1.
Khan,
W.A.; Khan, M. A. (1998);“ A Review of Traveling Salesman Problem”;
vol. 35, No. 2, 133-145, Proceedings of Pakistan Academy of Sciences.
Khan,
W.A., Hayhurst, D.R., and Cannings, C.; (1999); “Determination of
Optimal path under approach and exit constraints”; 117, 310-325,
European J. of Operational Research.
Khan,
M. A.; Khan, W. A.; (1999);“ A Parallel implementation of simulated
annealing Algorithm”; 36(2), 95-101, Proceedings of Pakistan Academy
of Sciences
Khan,
W.A; Hayhurst, D.R. (2000); “Two and three dimensional path
optimization for production machinery”; Journal of Manufacturing
Science and Engineering, Transactions of ASME, Nov 1999, Vol. 121/1.
Khan,
W.A.; Khan, M. A.; Hayhurst, D.R.; (2000);”Use of Technological
constraints as Enumeration Criteria for the Solution of TSP Applicable
to Production Machinery”; Journal of Engineering Manufacture:
Proceedings of the
Institution of Mechanical Engineers, Vol. 214 part B.
Khan,
W.A.; Al-Doussari S.M.R; Al-Kahtani A.H.M; (2002), ‘ Establishment of
Engineering Laboratories for undergraduate and postgraduate
education’; Vol.27, No. 4, 425-435, European J. of Engineering
Education.
Aldoussari
S.M.R.; Khan W.A. (2003),’TSP Solution Using Enumeration at
Serial Computing Machines’; Vol. 2, No. 4, 425-435, June 2003 issue;
Proceedings Pakistan Academy of Sciences.
Khan
W.A (2003),’ Distance Learning Using Virtual Discrete Manufacturing
Facility’; To be submitted to European J. of Engineering Education.
Khan
W.A. et.al. , (2003)’ “Impacts of influx of
computer science graduates from south Asian countries to Europe
and North America” To be submitted to European J. of Engineering
Education.
Research
Paper (Conferences):
Khan,
W.A. and Shakil, M; (1995); “GENPP - A Computer Aided Generative
Process Planning System”; Proceedings VIIth National Conference on
Aeronautics, College of Aeronautical Engineering, Risalpur, Pakistan.
Khan,
W.A.; (1996); “Path Optimization for Computer Numerical Control
Machines”; Proceedings 36th Convention of the Institution of
Engineers, Pakistan.
Khan,
W.A.; (1997); “Convergence Behavior of Simulated Annealing Algorithm
for Random Topology of Productive Contours Formed at the Machine
Tools”; Proceedings Vth International Symposium on Materials 21-25
Sept., 1997 Islamabad, Pakistan.
Chattha,
J.A; Khan, W.A; Qureshi, B.M.;(1998); “Automatic coding facility for
product life cycle”;
Proceedings R’99 – Recovery, Recycling, Re-integration world
congress, Geneva, Switzerland.
Khan,
W.A.; Kadir K.; Shaikh, Z. A.; Kidwai R.; (2001); “ Impacts of influx
of computer
science graduates from developing countries to Europe and North
America”; Proceedings IEEE FIE 2001 conference ‘The future impact on
Engineering science education’, October 10-13, 2001, Reno, Nevada,
USA.
Books
Published:
W.
A. Khan and A. Raouf; ‘Standards for Engineering Design and
Manufacturing’; October 2004, Marcel Dekker Inc.; USA.
[Understanding
the domain of Engineering Design and manufacturing in an environment
where Standards are applied]
W.
A. Khan and A. Raouf; ‘Engineering Design and Manufacturing’;
Proposal under Review by John Wiley & Sons, London, England, UK.
[Converting
the domain of Marcel Dekker project into a VR application by using tools
such as Director, Flash, Java and C++]
W.A.Khan;
’Software tools for Virtual Manufacturing’; Proposal under
preparation.
[Describing
the experience of developing VR for John Wiley from software tools
perspective]
